Home Flooring and green walls Ceramic tiles Elevate Ceramic
Ceramic tiles
Elevate Ceramic
A raised porcelain floor with half the weight.
Thin 9 mm porcelain slabs on a draining, stabilising base and adjustable supports: a raised floor more than 50% lighter than one built with traditional 20 mm slabs.
How it works
Recycled-polycarbonate base modules sit on adjustable supports and carry the tiles evenly over their whole surface. The supports level the floor to the millimetre between 65 and 900 mm, with no glue and no screed.
Features
The main points of the system at a glance.
Many formats
Tiles of 60 x 60, 60 x 120, 80 x 80, 20 x 120 and 20 x 180 cm, at least 9 mm thick.
Weight
42–46 kg/m² for the complete raised floor.
Heavy use
A fifth support per module can be added where loads are high.
Where it fits
Roof terraces, balconies, rooftops and refurbishments where weight is limited.
Write to us for information or a quote
The Active Shade team will contact you about Elevate Ceramic.
Enquire about Elevate CeramicWhy choose it
Perfectly level
Adjustable supports compensate for slopes and uneven surfaces.
Drains below
Water runs off beneath the tiles to the waterproofing.
Dry installation
No glue, screed or wet work: the modules click together and can be lifted again for access to the layers below.
2-year warranty
Active Shade backs these systems with a 2-year warranty against manufacturing defects.
Technical data
50 x 50 x 3 cm base modules; height 65–900 mm (supports only, without tiles); distributed load 4.0 kN/m²; -20 °C to +75 °C.
- 65–900 mm
- 9 mm slabs
- Over 50% lighter
Installation, permits and assistance
Whatever you need, we will help you bring your new outdoor retreat to life.
Who helps me with planning and installation?
The Active Shade team supports you at every step: choosing the right model, designing it for your space and installing it.
Contact us